Loresco type FlexFillTM is designed
for use around continuous, long-line impressed current anodes.
FlexFillTM is the result of extensive laboratory testing combining
the rugged requirements of field installation with the demanding
performance characteristics required for long-line anodes.
The production of FlexFillTM begins with the critical selection
of a base carbon material which meets exacting standards. Calcination
of the base material is strictly controlled according to Loresco
quality control standards. Sizing of FlexFillTM during the manufacturing
process is also carefully controlled to meet the requirements
of conductive backfill used with long-line impressed current
anodes. All surfaces of FlexFillTM are modified with a conductive
coating which maximizes the electronic flow between FlexFillTM
and the long-line anode. In effect, this maximizes the life
of the anode.
FlexFillTM is a performing backfill medium designed specifically
for use with impressed current long-line anodes. Advanced particle
selection technology, enhanced surface modifications and rigid
production controls all combine to ensure that FlexFillTM surpasses
your performance requirements.
FlexFillTM is simple to install either by pouring or by subsurface
displacement with gravity flow. FlexFillTM has been designed
to be placed by either method with no additional steps necessary
to create a successful conductive medium. No vibrating nor
compacting is required.
- Fixed Carbon: 99.25%
- Ash: 0.25%
- Moisture: 0.50%
- Volatiles (950°): 0.0
- Bulk Density: 68 lbs. per cubic foot
- Particle Shape: Predominantly round
- Particle Surface: All particles are surface
modified for maximum electronic conductivity
- Particle Sizing: 90% between 1 mm and 5
- No de-dusting oils are allowed during particle
FlexFillTM is shipped in fifty (50) pound (22.7 kg) coated, woven
polypropylene bags. Pallets are available with 50 bags per
pallet. Proven export packaging is available. Bulk bags are